
A 4-axis machining center for door leaves: drilling, slot milling and machining of the top, back and bottom surfaces with a servo-controlled spindle. A servo robot loads the leaf, vertical pneumatic pistons hold it, and the finished leaf leaves on the output conveyor. Door leaves up to 141.7" long and 55.1" wide.
141.7"
Max. door length
55.1"
Max. door width
4 axes
Servo spindle
FANUC
CNC control
KEY FEATURES
+ Door leaf height up to 5.9", surface width up to 7.9"
+ Drilling, slot milling, top / back / bottom surfaces
+ Servo robot loading and referencing
+ Input conveyor right, output conveyor left
+ Vertical pneumatic door clamping
+ FANUC control with preset operations
+ Second side: flip on ball conveyor, robot re-references
STANDARD EQUIPMENT
Input and output conveyors
Horizontal ball conveyor for the second side
4.5 kW (6 HP) spindle, 18,000 rpm
CLOSER LOOK

Servo-controlled 4-axis spindle

Servo robot loading

Vertical pneumatic door clamping

Door leaf on the machining bed
WATCH IT RUN
GARNET PORTA on the Oz Machine USA YouTube channel
Spindle
4.5 kW · 18,000 rpm
Voltage
220V 3P, 60 Hz
Air
1.4 CFM · 100 psi
Weight
3,384 lb





